TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 441 of 552

TM 9-2350-311-34-2

NOTE

Before trunnion bracket is installed on cannon and mount, cannon and mount must be resting on

hydraulic tripod and cradle mount tripod.

3 Raise trunnion bracket (2) and slide over muzzle end of cannon tube (10) towards breech end.

4 As trunnion bracket (2) nears hydraulic tripod (11), support cannon tube (10) using trunnion bracket and re-

position hydraulic tripod on a smooth portion towards muzzle end of cannon tube.

NOTE

When installing, use care to clear bore evacuator, dust shield, and variable recoil cover and housing

group.

5 Move trunnion bracket (2) along cannon tube (10) toward cradle (12). Set in place on trunnion roller bear-

ings (9).

6 Remove hoist (7).

7 Remove hex nut (6) and eye bolt (5).

11-11