TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 448 of 552

TM 9-2350-311-34-2

CAB AMMUNITION RACK ASSEMBLY

—

CONTINUED

b.

Assembly/Installation

—

Continued

8

Install shims (13) as required, 12 sleeve spacers (12), 12 flat washers (11), and 12 cap screws (10) in cab

ammunition rack assembly (3) perimeter.

9

Install shims (9) as required, 20 sleeve spacers (8), 20 flat washers (7), and 20 cap screws (6) in cab am-

munition rack assembly (3) perimeter.

10

Install eight flat washers (5) and eight cap screws (4) in cab ammunition rack assembly (3) perimeter.

11

Hold six retainer assemblies (2.1) and 16 retainer assemblies (2) by handles and install in cab ammunition

rack assembly (3).

NOTE

Locking caps are located on cab ammunition rack assembly inside cab.

12

Rotate 31 locking caps (1) to CLOSED position.

12-6

Change 2