TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 124 of 508

TM 9--2520--215--34

0027 00--4

STEER CONTROL VALVE ASSEMBLY REPAIR – CONTINUED

0027 00

ASSEMBLY

1. Install two new inner retaining rings (17) in steer control valve body (2).

2. Install inner and outer steer control compression springs (12 and 13), detent plunger (11), and jam nut (10) on

each steer control valve (9). Temporarily adjust jam nut (10), but do not lock it.

3. Install two steer control valves (9) in steer control valve body (2).

4. Install new preformed packing (6) in steer control valve body (2). Seat preformed packing (6) in groove in steer

level shaft (5) bore.

5. Install steer control level shaft (5), making certain the two pins in the shaft engage the slots in the two detent

plungers (11), on the valve assemblies (9).

6. Install steer detent plug assembly (1). Torque plug to 40 to 50 lb--ft (54.2 to 67.8 N

S

m).

17

1

6

17

5

2

10

11

12

13

9

9

13

12

11

10

07i081ma