TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

  TM-9-2520-215-34 - Page 121 of 508

TM 9--2520--215--34
0027 00--1
STEER CONTROL VALVE ASSEMBLY REPAIR
0027 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Torque wrench (item 22, WP 0088 00)
Torque wrench (item 23, WP 0088 00)
Materials/Parts
Retaining ring (item 56, WP 0087 00)
Retaining ring (4) (item 87, WP 0087 00)
Preformed packing (3) (item 61, WP 0087 00)
Preformed packing (2) (item 13, WP 0087 00)
Materials/Parts -- Continued
Gasket (2) (item 57, WP 0087 00)
Sealing compound (item 1, WP 0085 00)
Self--locking nut (2) (item 95, WP 0087 00)
Equipment Conditions
Steer control valve assembly removed
(WP 0026 00)
DISASSEMBLY
NOTE
Do not disassemble detent plug assembly. If plug or ball is damaged or if spring tension is
weak, replace entire unit.
1. Remove steer detent plug assembly (1) from steer control valve body (2). Remove retaining ring (3) and steer
position indicator (4). Discard retaining ring.
1
2
4
3
2. Remove steer lever shaft (5) and preformed packing (6) from steer control valve body (2). Remove two plugs (7)
and two annular gaskets (8). Discard preformed packing and annular gaskets.
6
8
7
2
5
8
7


Back to Top