TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 122 of 508

TM 9--2520--215--34

0027 00--2

STEER CONTROL VALVE ASSEMBLY REPAIR – CONTINUED

0027 00

DISASSEMBLY – Continued

3. Remove two steer control valves (9) from steer control valve body (2).

9

2

NOTE

Do not disassemble valve assemblies unless parts replacement is necessary. Perform Step 4

or 5 only if replacement is necessary.

4. Remove nut (10), detent plunger (11) and two inner and two outer steer control compression springs (12 and 13)

from each steer control valve (9).

10

11

9

12

13

NOTE

Do not remove inner retaining rings from steer control valve body unless replacement is

necessary.

5. Remove two outer retaining rings (14), two plugs (15) and two seals (16) from steer control valve body (2).

Remove two inner retaining rings (17), if necessary. Discard seals and retaining rings, if removed.

07i123ma

2

17

16

15

14