TM-9-2520-234-35
POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A
TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL
JULY 1962
TM-9-2520-234-35 - Page 169 of 323
PAR
15 6
REAR HOUSING REBUILD
CHAP
5,
SEC
XVII I
Figure 194. Wood block installed to temporarily retain
cam rotating ring
Figure 195. Installing left-brake apply cam rotating ring
sary to prevent damaging the right- and left-
brake apply shafts (fig. 194).
ad.
Install
12
steel
balls
in
the
left-
brake apply cam stationary ring. Install ro-
tating ring (fig. 195).
Figure 196. Installing left-brake adjusting nut
Figure 197. Installing left-follower link shaft
ae . Assemble items 3 through 14 (fig.
379, fold-out 8) and install as in fig. 196.
Install brake adjusting nut on the brake link,
approximately 1/2 inch (fig. 196).
af . While holding the left-brake cam as-
sembly against spring pressure, install the
follower link shaft (fig. 197).
13 7
Back to Top
