TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 172 of 323

CHAP

5,

SEC

XI X

LEFT,

RIGHT STEER PLANETARIES REBUILD

PAR

158-160

Figure 203. Removing (or installing) steer planetary

carrier ring gear assembly

g . Using a hammer and punch, remove

four steer planetary carrier spindle lock pins

(fig. 204).

h . Using replacer plate 8351492, re -

placer 8351266 and a suitable press tool, press

four spindles from the planetary shaft and car-

rier assembly (fig. 205).

i . Remove the steer planetary carrie r

pinions (6, fig. 378, fold-out 7), roller bear-

ings 7, spacers 5 and 8, and thrust washers

4 and 9 from carrier 3.

159. CLEANIN G

Refer to par. 71 for cleaning recommen-

dations.

160. INSPECTION AND REPAIR

Refer to par. 72 for general inspection

and repair recommendations. Repair and re-

build points of measurement for fits, clear-

ances and wear limits are indicated by small,

lower case letters in figs. 378 and 380, fold-

outs 7 and 9. Refer to pars. 241 and 243 for

wear limits information.

14 0

Figure 204. Removing (or installing) spindle lock pin

Figure 205. Removing steer planetary carrier and shaft

assembly spindle