TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 231 of 319
TM 9-2520-238-34
REPAIR DIFFERENTIAL STEERING CONTROL ASSEMBLY — Continued
0026 00
NOTE
If any of three straight pins or six expansion plugs were removed from differential flange in
page 0026 00-5 above, do Step 3.
3.
Install new straight pin(s) (1) and/or new expansion plug(s) (2) in differential flange (3). Stake each plug(s) two places.
NOTE
If ring spacer, or sleeve bearings were removed from differential flange in page 0026 00-5 above,
do Step 4.
4.
Install new ring spacer (4), sleeve bearing (5), and/or sleeve bearing(s) (6) in differential flange (3). Use arbor press.
5.
Install differential spider (7) and spur gear (8) on control flange assembly (9).
0026 00-7
Back to Top
