TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 222 of 319
TM 9-2520-238-34
REPLACE DIFFERENTIAL STEERING CONTROL ASSEMBLY — Continued
0025 00
REMOVAL
CAUTION
Use care during removal of steering unit assembly to prevent separation of brake hub from
splined shaft.
1.
Support shaft at each end of control assembly (1) and carefully remove steering control assembly from differential
housing (2).
0025 00-2
Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm
personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air
or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a
high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to
remove dirt or mud.
WARNING
Back to Top
