TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34 - Page 227 of 319

TM 9-2520-238-34

REPAIR DIFFERENTIAL STEERING CONTROL ASSEMBLY — Continued

0026 00

4.

Remove ball bearing (1) from brake ﬂange (2). Use mechanical puller.

5.

Remove bearing thrust washer (3), sleeve bearing (4), and brake drum hub (5) with attached brake drum (6) from brake

ﬂange assembly (2).

NOTE

If inspection indicates that brake drum hub or brake drum require replacement, do Step 6.

6.

Remove 10 cotter pins (7), slotted nuts (8), 20 washers (9), and 10 cap screws (10) securing brake drum hub (5) to brake

drum (6). Separate hub and drum. Discard cotter pins.

0026 00-3