TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34

  TM-9-2520-238-34 - Page 228 of 319

TM 9-2520-238-34
REPAIR DIFFERENTIAL STEERING CONTROL ASSEMBLY — Continued
0026 00
7.
Remove six cotter pins (1), slotted nuts (2), and washers (3) holding external spur gears (4) to gear shafts (5) between
control flange assembly (6) and brake flange assembly (7). Discard cotter pins.
8.
Remove six spur gears (4) from gear shafts (5). Use mechanical puller. Remove six woodruff keys (8) from gear shafts.
Discard keys.
9.
Remove six cotter pins (9), slotted nuts (10), and machine bolts (11) holding control flange assembly (6) to brake flange
assembly (7). Separate control flange and brake flange assemblies. Use soft hammer. Discard cotter pins.
10. Remove spur gear (12) and six gear shafts (5) from differential spider (13).
11. Separate spur gear (14) and spider (13) from control flange assembly (6). Use soft hammer.
0026 00-4


Back to Top