TM-9-2520-238-34P
M113A1 FOV, M113A2 FOV, M548 AND M548A1
DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST); RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34P - Page 11 of 80
SECTION I
TM 9-2520-238-34P
7
(3) STOCK NUMBER column.
This column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and CAGEC columns to the left.
(4) FIGURE NUMBER column.
This column lists the number of the figure where the item is
identified/located in Section II and III.
(5) ITEM NUMBER column.
The item number is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
5.
Special Information
Use the following subparagraphs as applicable:
a. USABLE ON CODES.
Not applicable.
b. FABRICATION INSTRUCTIONS
. Bulk materials required to manufacture items are listed in the Bulk
Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the
description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication
instructions for items source coded to be manufactured or fabricated are found in TM 9-2520-238-34.
c. ASSEMBLY INSTRUCTIONS
. Detailed assembly instructions for items source coded to be assembled
from
component spare/repair parts are found in TM 9-2350-238-34. Items that make up the assembly are
listed immediately following the assembly item entry or reference is made to an applicable figure.
d. KITS
. Line item entries for repair parts kits appear in group 9401 in Section II.
e. INDEX NUMBERS
. Items which have the word BULK in the figure column will have an index number
shown in the item number column. This index number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in Section II.
Back to Top
