TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 227 of 418

TM 9-2520-246-34-1

d. Rear Output Shaft Assembly.

FRAME 1

NOTE

Readings must be within limits given in table 2-46. If read-

ings are not within given limits, throw away part and get a

1.

2.

3.

GO

new one.

Measure inner race of two

Measure rear output shaft

Measure rear output shaft

TO FRAME 2

bearings (1 and 2).

outside diameter (3 and 4).

bore (5).

Table 2-46. Rear Output Shaft and Bearings Wear Limits

Index Number

1

2

3

4

Item/Point of Measurement

Bearing inside diameter

Bearing inside diameter

Shaft outside diameter

Shaft outside diameter

Output shaft bore

Size and Fit

of New Parts

(inches)

1.7500 to 1.7505

2.6250 to 2.6260

1.7510 to 1.7515

2.6265 to 2.6275

1.8126 to 1.8136

Wear Limit

(inches)

None

None

2.7505

2.6260

1.8142

5

2-207