TM-9-2520-246-34-1
TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C
TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL
JANUARY 1981
TM-9-2520-246-34-1 - Page 228 of 418
TM 9-2520-246-34-1
FRAME 2
1.
Measure fit
2.
Measure fit
END OF TASK
NOTE
Readings must be within limits given in table 2-47.
The letter T indicates a tight fit. If readings are
not within given limits, throw away part and get
a new one.
of bearing cone (1) on rear output shaft (2).
of bearing cone (3) on rear output shaft (4).
Table 2-47.
Rear Output Shaft Assembly Fits and Tolerances
Index Number
1 and 2
3 and 4
Item/Point of Measurement
Fit of bearing cone on shaft
Fit of bearing cone on shaft
Size and Fit
of New Parts
(inches)
0.0005T to 0.0015T
0.0005T to 0.0025T
Wear Limit
(inches)
0.000T
0.000T
2-208
Back to Top
