TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 400 of 933
TM 9-2520-270-34
REPLACE INPUT BEVEL ASSEMBLY
DESCRIPTION
This task covers: Remove (page 4-94). Install (4-102).
INITIAL SETU P
Tools:
Angle bracket — (Item 2, App C)
Arbor press – (Item 3, App C)
Backlash actuator assembly — (Item 4, App C)
Bearing extractor — (Item 5, App C)
Bevel gear shimming fixture —
(Item 16, App C)
C-clamp (2) – (Item 18, App C)
Crowfoot attachment – (Item 20, App C)
Dial indicator – (Item 23, App C)
Drag wrench – (Item 24, App C)
General mechanic’s tool kit: automotive —
(Item 33, App C)
Inserted hammer face holder —
(Item 39A, App C)
Inserted hammer face – (Item 39B, App C)
Inserted hammer face – (Item 39C, App C)
Leather gloves — (Item 42, App C)
Mechanical puller kit — (Item 49, App C)
Micrometer caliper set — (Item 52, App C)
Micrometer depth gage — (Item 54, App C)
Retaining-ring pliers — (Item 59, App C)
Socket wrench adapter — (Item 74, App C)
Socket wrench attachment – (Item 80, App C)
Socket wrench set – (Item 89, App C)
Thermal drying oven — (Item 94, App C)
Torque wrench — (Item 99, App C)
Tools: (cont)
Torque wrench — (Item 100, App C)
Wire-twister pliers — (Item 107, App C)
Materials/Parts:
Dry ice – (Item 4, App B)
Lockwire – (Item 5, App B)
Sealant compound — (Item 11, App B)
Transmission oil – (Item 12, App B)
Wood block (2) — (Item 6, App D)
Bevel gearshaft shim repair kit (2)
Input bevel repair kit
Socket head cap screw
Wood dowel – (Item 8, App D)
Personnel Required:
Track Veh Rep 63H10
Helper (H)
References:
TM 9-214
Equipment Conditions:
Transmission mounted on tip-over stand.
See page 2-144.
REMOVE
1.
2.
3.
REMOVE CONTROLLER ASSEMBLY. See
task REPLACE CONTROLLER ASSEMBLY,
page 3-32.
REMOVE DISCONNECT CLUTCH. See task 4.
REPLACE DISCONNECT CLUTCH,
page 4-52.
4-94
Change
3
REMOVE DISCONNECT CLUTCH
ASSEMBLY. See task REPLACE
DISCONNECT CLUTCH ASSEMBLY,
page 4-78.
REMOVE POWER TAKEOFF ASSEMBLY.
See task REPLACE POWER TAKEOFF
ASSEMBLY, page 4-140.
Back to Top
