TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 406 of 933

TM 9-2520-270-34

25. REMOVE SHAFT COUPLING (1) WITH

CONE AND ROLLERS (2) FROM

GEARSHAFT (3).

27. REMOVE CONE AND ROLLERS (2)

FROM COUPLING (1).

a. Using mechanical puller kit, remove

cone and rollers (2) from coupling (1).

Replace cone and rollers.

4-98

26. INSPECT CONE AND ROLLERS (2).

a. Inspect cone and rollers (2) for

damage. See TM 9-214.

b. If cone and rollers (2) are damaged,

go to step 27. If not, go to step 30.

28. INSPECT COUPLING (1).

a. Inspect coupling (1) for damage. See

page 2-5.

b. If coupling (1) is not damaged, go to

step 29. If coupling is damaged, replace

coupling and go to step 30.