TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 254 of 620

TM 9-2520-272-40

0031

2. Install two new O-Rings (Figure 4, Item 10) on oil transfer tube (Figure 4, Item 11).

3. Apply petrolatum to O-Rings (Figure 4, Item 10).

4. Push oil transfer tube (Figure 4, Item 11), either end, into center hole in bottom of equalizer valve diaphragm

(Figure 4, Item 8).

5. Install equalizer valve diaphragm (Figure 4, Item 8) so that end of oil transfer tube (Figure 4, Item 11) enters

hole (Figure 4, Item 13) in bevel gear assembly.

6. Push on diaphragm (Figure 4, Item 8) to install oil transfer tube (Figure 4, Item 11) in bevel gear assembly and

install diaphragm (Figure 4, Item 8) in center housing bore (Figure 4, Item 14).