TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 246 of 620

TM 9-2520-272-40

0030

NOTE

The brake apply tube is pushed into the right brake support and uses only one packing.

4. Install one new packing (Figure 5, Item 7) on the brake apply tube (Figure 5, Item 8), which is pushed into the

right brake support (Figure 5, Item 14). Coat the packing (Figure 5, Item 7) with petrolatum.

5. Install two new packings (Figure 5, Item 10) on the brake coolant tube (Figure 5, Item 11). Coat packings

(Figure 5, Item 10) with petrolatum.

6. Install one of the two ends of the brake coolant tube (Figure 5, Item 11) into the bore (Figure 5, Item 15) in the

right brake support (Figure 5, Item 14).