TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 236 of 620

TM 9-2520-272-40

0029

NOTE

If bearings require replacement, continue on to Step 7.

If bearings are serviceable, go to the NOTE just before Step 8.

7. Remove two bearings (Figure 3, Item 9) from range output drive gear (Figure 3, Item 7).

NOTE

If bearings require replacement, continue on to Step 8.

If bearings are serviceable, go to Replace Inner (Left) Steer Shaft, Range Output Gear Spacer,

and Tubes (WP 0030).

8. Remove bearing (Figure 3, Item 8) from steer shaft drive gear (Figure 3, Item 4).