TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 361 of 620

TM 9-2520-272-40

0044

INSTALL SUMP COMMUNICATION TUBE

NOTE

Make sure that the transmission is on maintenance stand with the input end turned up.

After sump communication tube has been removed, right cover assembly must stay off

transmission until sump communication tube has been installed.

Sump communication tube is not installed until after bevel gear assembly has been installed.

1. Apply petrolatum to machined end (smaller end) of sump communication tube (Figure 3, Item 3).

2. Install sump communication tube (Figure 3, Item 3), small end f rst, through tube bore in right end of

transmission center housing assembly (Figure 3, Item 2).