TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 363 of 620

TM 9-2520-272-40

0045

SUSTAINMENT MAINTENANCE

REPLACE LEFT BRAKE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Hammer, Hand, Soft-Face, Dead Blow, 52 oz

(WP 0079, Item 19)

Pliers Set, Retaining Ring (WP 0079, Item 27)

Shim (WP 0075, Item 5)

Stand, Maintenance, Automotive (WP 0079, Item 40)

Tool Kit, General Mechanic’s (GMTK) (WP 0079,

Item 45)

Wrench, Torque, Dial, 3/8” Drive, 300 lb-in.

(WP 0079, Item 50)

Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft

(WP 0079, Item 51)

Materials/Parts

Bands, Rubber No. 19 (WP 0078, Item 2) (2)

Block, Wood, Lumber, Soft Wood (WP 0078, Item 3)

(2 - 16 in. lengths)

Gasket (WP 0080, Item 50)

Lubricating Oil, Engine (WP 0078, Item 10)

O-Ring (WP 0080, Item 51)

Petrolatum, Technical (Petroleum Jelly) (WP 0078,

Item 12)

Ring Retaining (Seal Ring, Metal) (WP 0080, Item

15)

Sealant, Lubricating, Thread-Locking (WP 0078,

Item 15)

Seal Ring, Metal (WP 0080, Item 13)

Seal Ring, Metal (WP 0080, Item 16)

Seal, Brake Coolant (WP 0080, Item 34)

Personnel Required

Track Vehicle Repairer, 91H10 (2)

References

TM 9-214

WP 0046

WP 0047

Equipment Condition

Transmission removed from vehicle or container (TM

9-2350-277-13&P)

Oil f ll tube assembly removed (WP 0006)

Right cover assembly removed (WP 0016)

REMOVE LEFT BRAKE ASSEMBLY

NOTE

Transmission is on maintenance stand, right end turned up.

1. Remove 15 bolts (Figure 1, Item 1) and 15 washers (Figure 1, Item 2) from left brake support (Figure 1, Item 3).