TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 370 of 620

TM 9-2520-272-40

0045

27.Remove outer carrier (Figure 9, Item 32), brake clutch drum (Figure 9, Item 36) and retaining ring (Figure 9,

Item 35), as an assembly and turn it over for disassembly.

NOTE

Thrust washer bearing may stay on the underside of the outer carrier assembly or left steer

and output sun gear.

28.Remove thrust washer bearing (Figure 10, Item 37) from bottom of assembly removed in Step 27 or from

left steer and output sun gear (Figure 10, Item 38).

29.Remove retaining ring (Figure 9, Item 38) from brake clutch drum (Figure 9, Item 36).

30.Remove output planetary (Figure 9, Item 38) from brake clutch drum (Figure 9, Item 36).

31.Press down with one hand on clutch plate (Figure 10, Item 39), against spring force, near retaining ring (Figure

10, Item 40). Remove retaining ring (Figure 10, Item 40). Use the same method to remove f ve more retaining

rings (Figure 10, Item 40).

32.Remove clutch plate (Figure 10, Item 39).