TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 367 of 620

TM 9-2520-272-40

0045

10.Remove retaining ring (Figure 5, Item 18) from end of control cam (Figure 5, Item 13).

11. Remove washer (Figure 5, Item 17) from control cam (Figure 5, Item 13).

12.Remove torsion helical spring (Figure 5, Item 16) from control cam (Figure 5, Item 13).

13.Remove control cam (Figure 5, Item 15) from control cam (Figure 5, Item 13).

14.Remove retaining ring (Figure 5, Item 14) from control cam (Figure 5, Item 13).

15.Remove control cam (Figure 5, Item 13) from left brake support (Figure 5, Item 3).

NOTE

The left brake support has the bearing races for the output driven gear, output drive gear,

and steer gear.

Refer to WP 0046 for repair of left brake support.

16.Do a check of left brake support (Figure 5, Item 3) including bearing races (refer to TM 9-214) to make sure

left brake support (Figure 5, Item 3) and bearing races are serviceable.