TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 415 of 620

TM 9-2520-272-40
0051
12.Apply petrolatum to the thrust washer (Figure 3, Item 14). Install the thrust washer (Figure 3, Item 14) in
bottom of the body hub (Figure 3, Item 15).
13.Install the body hub (Figure 3, Item 15) on the retaining plate (Figure 3, Item 12).
14.Soak f ve friction plates (Figure 3, Item 3) in engine lubricating oil for two minutes before you install them.
15.Install one reaction plate (Figure 3, Item 4), then one friction plate (Figure 3, Item 3). Continue until f ve friction
plates (Figure 3, Item 4) and f ve reaction plates (Figure 3, Item 3) are installed.
16.Install the clutch assembly (hub) (Figure 3, Item 2).
17.Install the retaining ring (Figure 3, Item 1).


Back to Top