TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 422 of 620

TM 9-2520-272-40

0052

12.Soak f ve friction plates (Figure 3, Item 3) in engine lubricating oil for two minutes before you install them.

13.Install one reaction plate (Figure 3, Item 4), then one friction plate (Figure 3, Item 3). Continue until f ve

reaction plates (Figure 3, Item 4) and f ve friction plates (Figure 3, Item 3) are installed into clutch housing

(Figure 3, Item 11).

14.Install backing plate (Figure 3, Item 2).

15.Install retaining ring (Figure 3, Item 1).

Check Assembled Clutch for Damaged Seal

1. Apply petrolatum to two seals (Figure 3, Item 16) on the larger hub of the leak test f xture assembly (Figure 3,

Item 19). Install the f xture all the way into clutch assembly (Figure 3, Item 15).

WARNING