TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 511 of 620
TM 9-2520-272-40
0062
SUSTAINMENT MAINTENANCE
FINAL ADJUSTMENTS OVERVIEW
INITIAL SETUP:
NOT APPLICABLE
SCOPE
This work package contains a list of applicable work packages to refer to when performing f nal static checks and
adjustments required after maintenance actions have been completed and prior to use, shipment, or storage.
Final static checks and adjustments shall be performed after maintenance actions have been completed and
prior to use, shipment, or storage.
Functional tests shall be performed with the transmission coupled to the engine and the power pack installed in
the vehicle. (Refer to the vehicle manual.) Functional tests must include correct oil and level and a thorough
inspection for oil leaks, steering adjustment check, and brake adjustment check. Maintenance records shall be
reviewed for complete and correct entries.
Refer to Table 1 for a list of work packages that describe f nal adjustment procedures.
Table
1.
Final Adjustment Procedures by Work Package.
Procedure
Work Package
Check Output Shaft Drag, Left and Right
WP 0063
Torque Wrench Check
WP 0064
Adjust Left Brake
WP 0065
Adjust Right Brake
WP 0066
ENDOFWORKPACKAGE
0062-1/2 blank
Back to Top
