TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 504 of 620

TM 9-2520-272-40

0060

6. Install S-chain hook (Figure 8, Item 8) in eyebolt (Figure 8, Item 2) and attach sling (Figure 8, Item 7). Hoist

hydrostat (Figure 8, Item 6) over hydrostat bore in center housing (Figure 8, Item 13) using hoist and trestle.

NOTE

Center housing is cut away to receive the raised part of the hydrostat housing where the steer

control assembly will be installed.

7. Turn hydrostat (Figure 9, Item 6) so that platform (Figure 9, Item 15) for steer control assembly lines up with

recess (Figure 9, Item 14) in center housing (Figure 9, Item 13). Lower hydrostat into transmission, aligning

gear at base of hydrostat with gear in center housing.