TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 509 of 620

TM 9-2520-272-40

0061

INSTALL GOVERNOR DRIVE GEAR, GOVERNOR BODY ASSEMBLY, AND GOVERNOR ASSEMBLY

NOTE

Transmission is on maintenance stand, right side up.

1. Install governor drive gear (Figure 3, Item 8) onto range output shaft (Figure 3, Item 12).

2. Install retaining ring (Figure 3, Item 7) into groove of range output shaft (Figure 3, Item 12).

3. Install governor body assembly (Figure 3, Item 9).

4. Install three washers (Figure 3, Item 11) and bolts (Figure 3, Item 10) to retain governor body assembly

(Figure 3, Item 9).

5. Torque three bolts (Figure 3, Item 10) to 36 to 43 lb-ft (49 to 68 N·m).