TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 92 of 288
TM 9-2540-207-14&P
5-48
Ignitor (Continued)
5.7.3.1 Removal
1.
Remove Ignitor Hatch (ref. 5.7.4).
2.
Using a 3/8" socket or wrench, remove Ignitor threaded into the Ignitor Holder.
5.7.3.2 Installation
1.
If a NEW Ignitor is to be installed:
a.
Remove Top Cover (ref 5.4.1).
b.
Remove spare Ignitor mounted in the Top Housing.
c.
Remove the shipping nut on the electrical post of the Ignitor, DO NOT remove
the spring washer.
d.
Install Top Cover (ref. 5.4.1).
2.
Apply Nickel anti-seize (Loctite 77164) to the threads of the Ignitor.
3.
Using a 3/8" socket, or open ended wrench, install the Ignitor. DO NOT over tighten.
4.
Install the Ignitor Hatch, DO NOT over tighten.
Be sure NOT to pinch or crush any wires when installing Ignitor and/or Ignitor Holder.
Back to Top
