TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 98 of 288
TM 9-2540-207-14&P
5-54
Burner Chamber (continued)
5.
Secure the Ignitor Holder using a 3/4" deep socket.
6.
Coat a new Burner O-Ring with common grease (GAA) and install the O-Ring onto the
Burner Housing. (ref. Figure 5.7-11
Fuel Shaft & Pushnut).
7.
Install Combustor Assembly (ref. 5.7.1).
8.
Install Vent Fan Assembly (ref. 5.6.1).
9.
Install Bottom Shell (ref. 5.4.3).
10.
Install Top Shell (ref. 5.4.2).
5.7.6
Burner Cartridge (Applies to all Design Iterations)
Figure 5.7-9
Burner Cartridge
5.7.6.1 Removal
1.
Remove Top Shell (ref. 5.4.2).
2.
Remove Bottom Shell (ref. 5.4.3).
3.
Remove Vent Fan Assembly (ref. 5.6.1).
4.
Remove Combustor Assembly (ref. 5.7.1).
Back to Top
