TM 9-2540-207-14&P
5-55
Burner Cartridge (Continued)
5.
Remove Burner Chamber (ref. 5.7.5).
Do NOT allow Burner Wick to fall from Burner Cartridge
6.
Remove the burner Cartridge from inside the Burner Chamber.
Note:
Take great care when handling the Burner Cartridge so as not to
damage the Burner Wicks.
Note: IF the wicks are greater than 50% deteriorated, replace the entire
Burner Cartridge.
Figure 5.7-10
New Burner Wick (left); 50% deteriorated Burner Wick (right)
Gently wiping with a soft cloth is permitted.
7.
Carefully remove any carbon deposits from the Burner components by gently wiping or
brushing away the deposits taking care not to damage the Fuel shaft and the Push Nut
on the Fuel Shaft.
Do not clean Burner Wick except with compressed air.
Do not use
solvents for the cleaning of the Burner Wick.