TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 152 of 779

Figure 4-145. Disconnecting or connectin g

shroud from top frame-right front side .

Disconnect

1. Remove one pan head screw (A) attaching right oil

cooler end shroud.

2. Remove one self-locking nut and bolt (B) and remove

right upper transmission shroud.

Connect

1. Position right upper transmission shroud and install

one bolt (B) and self-locking nut.

2. Install one pan head screw (A) securing right oil

cooler end shroud.

Figure 4-146. Disconnecting or connectin g

right oil cooler end shroud and uppe r

transmission shroud .

4-70

Disconnect

1. Remove two screws (A) attaching frame to right rear

shroud.

2. Remove two screws (B) attaching turbosupercharger

shroud to right rear shroud.

Connect

1. Install two screws (B) securing turbosupercharger

shroud to right rear shroud.

2. Install two screws (A) securing frame to right rear

shroud.

Figure 4-147. Disconnecting or connectin g

right rear shroud from top frame .