TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 155 of 779

Disconnect

1. Disconnect fuel injector nozzle fuel inlet tube (A).

2. Disconnect fuel injector nozzle fuel return tubes (B) at

nozzle adapter.

Connect

1. Connect fuel injector nozzle fuel return tubes (B) at

nozzle adapter.

2. Connect fuel injector nozzle fuel inlet tube (A).

Figure 4-150. Disconnecting or connectin g

fuel injector nozzle holder fuel inlet and

return tubes .

Remove

1. Remove nozzle adapter bolt (A).

2. Remove nozzle adapter and discard two gaskets (B).

Install

1. Install one gasket (B) on nozzle adapter bolt (A),

install bolt through adapter, and install second gasket

(B).

2. Install nozzle adapter and tighten bolt (A).

Figure 4-151. Removing or installing fue l

injector nozzle fuel tube adapters .

4-73