TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 195 of 779

Remove

1. Cut locking wire and remove two bolts ( A) and four

spacers attaching engine oil cooler to upper cover

frame.

2. Remove oil cooler (B).

3. Remove four fasteners (C) and remove retainer from

upper cover frame.

Install

1. Position engine oil cooler (B) against upper cover

frame.

2. Install two bolts (A) and four spacers securing oil

cooler to frame.

3. Position retainer on upper cover frame and install four

fasteners (C).

4. Tighten two bolts securing oil cooler to upper cover

frame and lock wire securely.

Figure 5-14. Removing or installing right

engine oil cooler.

Remove

1. Cut locking wire and remove two bolts (A) and four

spacers attaching transmission oil cooler to upper cover

frame.

2. Remove oil cooler (B) and shroud plate.

3. Remove five fasteners (C) and remove retainer frorn

upper cover frame.

Install

1. Position transmission oil cooler (B) and shroud plate

against upper cover frame.

2. Install two, bolts (A) and four spacers securing oil

cooler to frame.

3. Position retainer on upper cover frame and install five

fasteners (C).

4. Tighten two bolts securing oil cooler to upper cover

frame and lock wire securely.

Figure 5-15. Removing or installing right

transmission oil cooler.

Figure 5-16. Disconnecting or connecting

upper cover frame-right front view.

5-9