TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 437 of 779

Figure

6-168.

Removing or installing fuel

injection pump spur gearshaft

and bearing.

Remove

1. Remove bearing retaining ring (A).

2. Remove needle roller bearing (B) from rear fan drive

housing.

Install

1. Position needle roller bearing (B) in rear fan drive

housing.

2. Install bearing retaining ring (A).

Figure 6-170. Removing or installing needle

roller bearing retaining ring and bearing.

Figure 6-169. Removing or installing oil seal.

6-14 3