TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 438 of 779

1. Position fuel injection pump spur gearshaft (A) in

arbor press.

2. Press gearshaft from spur gearshaft ball bearing (B)

using press plate to support bearing.

Figure 6-171. Removing fuel injection pump

spur gearshaft ball bearing.

Remove

1. Straighten tab on retaining washer (A) and remove

gearshaft plug and washer.

2. Remove oil transfer plug (B) from camshaft drive

gearshaft.

Install

1. Position oil transfer plug (B) in camshaft drive

gearshaft.

2. Install gearshaft plug and retaining washer (A) torque

to 1000-1200 lb. in. and bend tab on washer securing

plug.

Figure 6-172. Removing or installing oil

transfer plug from camshaft drive gearshafts.

6-144