TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 458 of 779

1. Install six bolts (A) through gearshaft flange,

flyweight and drive gearshaft

flange.

Install two slotted

flyweight housing, advance vane housing, and secure in

nuts (B), flat washers, and cotter pins on flyweight pine

vane housing cover. Install locking wire securing bolts.

securing adjusting

ring.

2.

Move the adjusting ring to aline scribe marks on ring,

3. Install intermediate bearing support (C).

Figure 6-198. Installing advance flyweight adjusting ring and injection pump

drive gearshaft attaching parts (adjusting ring secured with bolts).

6-164