TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 342 of 856

REMOVAL - Continued

CAUTION

Cap each injector fuel fitting and nipple immediately after removing fuel tube assembly to

keep out dirt.

NOTE

Tag and mark fuel supply/return tube assemblies, rocker arm shaft, rocker arm shaft

brackets, eye brackets, and associated hardware with location references during removal.

This information will be required for correct replacement of items during installation.

3.

Loosen two captive nuts (Figure 5, Item 7) on fuel (supply) tube assembly (Figure 5, Item 8) from adapter

fitting (Figure 5, Item 10) on fuel injector (Figure 5, Item 1) and fuel (supply) nipple (Figure 5, Item 9) on

cylinder head assembly. Remove fuel tube assembly (Figure 5, Item 8).

7

7

8

9

10

1

MAINT_446

Figure 5.

Fuel Supply Tube Removal.

4.

Loosen two captive nuts (Figure 6, Item 11) on fuel (return) tube assembly (Figure 6, Item 12) from adapter

fitting (Figure 6, Item 13) on fuel injector (Figure 6, Item 1) and fuel (return) nipple (Figure 6, Item 14) on

cylinder head assembly. Remove fuel tube assembly (Figure 6, Item 12).

TM 9-2815-205-24

0054

0054-4