TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 334 of 856

REMOVAL

NOTE

Right and left rocker arm covers are identical except for oil filler hole. Use same procedure

to remove both covers.

1.

Remove two bolts (Figure 1, Item 18), two flat washers (Figure 1, Item 17), two resilient mounts

(Figure 1, Item 16), and rocker arm cover (Figure 1, Item 9) from cylinder head.

2.

Remove gasket (Figure 1, Item 11). Discard gasket.

3.

On models 5063-5393 and 5063-539L, remove clamp (Figure 1, Item 2) and hose (Figure 1, Item 3) from

breather housing (Figure 1, Item 1).

1

2

3

4

5

6

7

8

9

5

6

10

11

12

13

14

15

9

16

17

18

MODEL

5063-5392

MODELS

5063-5393

5063-539L

MAINT_155

Figure 1.

Rocker Arm Cover Removal.

END OF TASK

DISASSEMBLY

1.

Remove three screws (Figure 1, Item 12) and retainer (Figure 1, Item 13) from breather housing

(Figure 1, Item 1). Remove breather housing, filtering disk (Figure 1, Item 14), breather retainer

(Figure 1, Item 15), and seal (Figure 1, Item 4) from rocker arm cover (Figure 1, Item 9). Discard seal.

2.

On model 5063-5392, unscrew and remove oil filler cap (Figure 1, Item 8) from rocker arm cover

(Figure 1, Item 9).

3.

On models 5063-5393 and 5063-539L, remove oil filler cap (Figure 1, Item 7) as follows:

a.

Loosen knob on oil filler cap (Figure 1, Item 7) and remove cap from rocker cover (Figure 1, Item 9).

TM 9-2815-205-24

0053

0053-2