TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 327 of 856
INSTALLATION
1.
Insert fuel crossover tube (Figure 2, Item 10) into two elbows (Figure 2, Item 9) at front of cylinder heads.
Tighten nut on each elbow (Figure 2, Item 9).
2.
If removed, install clip (Figure 2, Item 18) on hose assembly (Figure 2, Item 6). Connect hose assembly
(Figure 2, Item 6) to tee (Figure 2, Item 8) in front of right cylinder head and to elbow (Figure 2, Item 7)
at rear of left cylinder head. Tighten hose connections.
3.
Connect hose assembly (Figure 2, Item 6) to air inlet housing (Figure 2, Item 17) with clip
(Figure 2, Item 18), screw (Figure 2, Item 21), new lockwasher (Figure 2, Item 20), and flat washer
(Figure 2, Item 19). Torque screw (Figure 2, Item 21) to 16–20 lb-ft (22–27 N·m).
4.
Connect hose assembly (Figure 2, Item 15) to tee (Figure 2, Item 8) in front of right cylinder head.
Tighten hose connection.
5.
If removed, install clip (Figure 2, Item 16) on hose assembly (Figure 2, Item 15). Install clip
(Figure 2, Item 16), screw (Figure 2, Item 14), new lockwasher (Figure 2, Item 13), and flat washer
(Figure 2, Item 12) on upper front cover (Figure 2, Item 11). Torque screw (Figure 2, Item 14)
to 30–35 lb-ft (41–47 N·m).
6.
Connect inlet hose assembly (Figure 1, Item 3) to elbow (Figure 1, Item 2) in fuel pump (Figure 1, Item 1).
Tighten hose connection.
7.
Connect outlet hose assembly (Figure 1, Item 4) to elbow (Figure 1, Item 5) in fuel pump (Figure 1, Item 1).
Tighten hose connection.
19
18
11
10
12
16
15
15
6
17
8
20
21
9
7
6
13
14
LEFT REAR
VIEW
MAINT_153
Figure 2.
Fuel Line Removal/Installation.
END OF TASK
TM 9-2815-205-24
0051
0051-3
Back to Top
