TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 326 of 856
REMOVAL
1.
Disconnect inlet hose assembly (Figure 1, Item 3) from elbow (Figure 1, Item 2) in fuel pump
(Figure 1, Item 1). Remove hose assembly (Figure 1, Item 3).
2.
Disconnect outlet hose assembly (Figure 1, Item 4) from elbow (Figure 1, Item 5) in fuel pump
(Figure 1, Item 1). Remove hose assembly (Figure 1, Item 4).
1
2
3
4
5
MAINT_152
Figure 1.
Fuel Line Removal.
3.
Remove screw (Figure 2, Item 14), lockwasher (Figure 2, Item 13), flat washer (Figure 2, Item 12), and clip
(Figure 2, Item 16), on hose assembly (Figure 2, Item 15), from upper front cover (Figure 2, Item 11).
Discard lockwasher (Figure 2, Item 13). If necessary, remove clip (Figure 2, Item 16) from hose
assembly Figure 2, Item 15).
4.
Disconnect hose assembly (Figure 2, Item 15) from tee (Figure 2, Item 8) in front of right cylinder head.
Remove hose assembly (Figure 2, Item 15).
5.
Remove screw (Figure 2, Item 21), lockwasher (Figure 2, Item 20), flat washer (Figure 2, Item 19), and clip
(Figure 2, Item 18), on hose assembly (Figure 2, Item 6), from air inlet housing (Figure 2, Item 17).
Discard lockwasher (Figure 2, Item 20). If necessary, remove clip (Figure 2, Item 18) from hose
assembly (Figure 2, Item 6).
6.
Disconnect hose assembly (Figure 2, Item 6) from tee (Figure 2, Item 8), in front of right cylinder head, and
from elbow (Figure 2, Item 7) in rear of left cylinder head. Remove hose assembly (Figure 2, Item 6).
7.
Loosen nut on two elbows (Figure 2, Item 9), at front of cylinder heads, and remove fuel crossover
tube (Figure 2, Item 10).
END OF TASK
TM 9-2815-205-24
0051
0051-2
Back to Top
