TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 322 of 856
REMOVAL
1.
Remove screw (Figure 1, Item 1), lockwasher (Figure 1, Item 2), and clip (Figure 1, Item 3), on hose
assembly (Figure 1, Item 12), from air inlet housing (Figure 1, Item 4). Discard lockwasher. If necessary,
remove clip from hose assembly.
2.
Disconnect hose assembly (Figure 1, Item 12) from tee (Figure 1, Item 11) at rear of left cylinder head and
from elbow (Figure 2, Item 16) at front of right cylinder head. Remove hose assembly. If necessary, remove
two clips (Figure 1, Item 13) from hose assembly.
3.
Disconnect hose assembly (Figure 1, Item 10) from tee (Figure 1, Item 11) at rear of left cylinder head.
Remove hose assembly.
4.
Disconnect hose assembly (Figure 1, Item 6) from elbow (Figure 1, Item 7) in fuel pump (Figure 1, Item 9).
Remove hose assembly.
5.
Disconnect hose assembly (Figure 1, Item 5) from elbow (Figure 1, Item 8) in fuel pump (Figure 1, Item 9).
Remove hose assembly.
1
2
3
4
5
6
7
8
9
10
11
12
13
MAINT_150
Figure 1.
Fuel Line Removal.
6.
Loosen nuts on two elbows (Figure 2, Item 14) at front of cylinder heads and remove fuel crossover tube
(Figure 2, Item 15).
END OF TASK
TM 9-2815-205-24
0050
0050-2
Back to Top
