TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 313 of 856
REMOVAL - Continued
NOTE
The transmission oil cooler assembly and thermostat water outlet were removed in
(WP 0011) to allow mounting engine on maintenance stand.
6.
Remove two short bolts (Figure 2, Item 23), two long bolts (Figure 2, Item 24), four lockwashers
(Figure 2, Item 22), four flat washers (Figure 2, Item 21), thermostat water outlet (Figure 2, Item 25), and
gasket (Figure 2, Item 28) from top of transmission oil cooler assembly (Figure 2, Item 29).
Discard gasket and lockwashers.
7.
Remove thermostat (Figure 2, Item 27) and seal (Figure 2, Item 26) from thermostat water outlet
(Figure 2, Item 25). Discard seal. If necessary, remove plug (Figure 2, Item 20) from cover.
20
21
22
23
24
22
21
25
26
27
28
29
MAINT_144
Figure 2.
Thermostat Removal.
END OF TASK
TM 9-2815-205-24
0048
0048-3
Back to Top
