TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 307 of 856

CLEANING

WARNING

Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;

use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and

do not breathe vapors. Keep away from heat or flame. Never smoke when using

cleaning solvent. Failure to comply may result in injury or death to personnel.

Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use

only with protective equipment (goggles, face shield, gloves, etc.). Failure to

comply may result in injury to personnel.

Clean plugs and metal parts in dry cleaning solvent and dry in compressed air. Clean drain cock with probe.

END OF TASK

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Inspect crossover tubes for cracks or damage.

2.

Inspect hoses for cracks, wear, or damage.

3.

Inspect thermostat as follows:

a.

Immerse thermostat (Figure 2, Item 8) in suitable container or utility pail of water. Do not allow

thermostat to touch bottom of container.

8

MAINT_141

Figure 2.

Thermostat Check.

TM 9-2815-205-24

0047

0047-3