TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 301 of 856

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

Inspect igniter, nozzle, and air box heater for cracks, pitting, or wear.

END OF TASK

ASSEMBLY

1.

Install nozzle (Figure 2, Item 7) in air box heater (Figure 2, Item 5). Tighten securely.

2.

Install igniter (Figure 2, Item 8) in air box heater (Figure 2, Item 5). Tighten securely.

3.

Install elbow (Figure 2, Item 9) in fuel inlet port of air box heater (Figure 2, Item 5).

4.

Install connector (Figure 2, Item 11) and elbow (Figure 2, Item 10) in air inlet port of air box heater

(Figure 2, Item 5).

END OF TASK

ADJUSTMENT

NOTE

Test igniter and ignition coil simultaneously (WP 0043) and (WP 0044).

Using a thickness gage, adjust igniter-wire air gap to 0.080 inch (2.03 mm) (Figure 3).

0.080 in.

(2.03 mm)

MAINT_138

Figure 3.

Air Box Heater Adjustment.

END OF TASK

TM 9-2815-205-24

0046

0046-5