TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 316 of 856

INSTALLATION - Continued

4.

Install new gasket (Figure 5, Item 18), water outlet tee (Figure 5, Item 1), two flat washers (Figure 5, Item 9),

two new lockwashers (Figure 5, Item 8), and two screws (Figure 5, Item 7) on front of left cylinder head.

Torque screws to 30–35 lb-ft (41–47 N·m).

5.

Install bracket (Figure 5, Item 5), three flat washers (Figure 5, Item 2), three new lockwashers

(Figure 5, Item 3), one short screw (Figure 5, Item 6), and two long screws (Figure 5, Item 4) on water outlet

tee (Figure 5, Item 1) and cylinder head. Torque screws to 30–35 lb-ft (41–47 N·m).

6.

Install new gasket (Figure 5, Item 17), water outlet elbow (Figure 5, Item 16), two new lockwashers

(Figure 5, Item 14), two flat washers (Figure 5, Item 15), and two screws (Figure 5, Item 13) to front of right

cylinder head. Torque screws to 30–35 lb-ft (41–47 N·m).

7.

If removed, install plug (Figure 5, Item 12) in water outlet elbow (Figure 5, Item 16).

8.

Slide two hoses (Figure 5, Item 11) and four clamps (Figure 5, Item 10) onto crossover tube

(Figure 5, Item 19). Install crossover tube between water outlet elbow (Figure 5, Item 16) and water outlet

tee (Figure 5, Item 1). Slide two hoses and four clamps over connections and tighten clamps.

1

2

3

4

5

2

3

6

7

8

9

10

10

11

12

13

14

15

16

17

18

19

MAINT_147

Figure 5.

Thermostat Housing and Crossover Tube Installation.

END OF TASK

FOLLOW ON TASK

Install angle bracket and air pump assembly bracket (WP 0044).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0048

0048-6