TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 312 of 856

REMOVAL

1.

Loosen four clamps (Figure 1, Item 10) and two hoses (Figure 1, Item 11) connecting crossover tube

(Figure 1, Item 19) to water outlet elbow (Figure 1, Item 16) and to water outlet tee (Figure 1, Item 1). Slide

clamps and hoses onto crossover tube. Remove tube and slide clamps and hoses off tube.

2.

Remove two screws (Figure 1, Item 13), two lockwashers (Figure 1, Item 14), two flat washers

(Figure 1, Item 15), water outlet elbow (Figure 1, Item 16), and gasket (Figure 1, Item 17) from right cylinder

head. Discard lockwashers and gasket.

3.

If necessary, remove plug (Figure 1, Item 12) from water outlet elbow (Figure 1, Item 16).

4.

Remove two long screws (Figure 1, Item 4), one short screw (Figure 1, Item 6), three lockwashers

(Figure 1, Item 3), three flat washers (Figure 1, Item 2), and bracket (Figure 1, Item 5) from water outlet tee

(Figure 1, Item 1). Discard lockwashers.

5.

Remove two screws (Figure 1, Item 7), two lockwashers (Figure 1, Item 8), two flat washers

(Figure 1, Item 9), water outlet tee (Figure 1, Item 1), and gasket (Figure 1, Item 18) from left cylinder head.

Discard gasket and lockwashers.

1

2

3

4

5

2

3

6

7

8

9

10

10

11

12

13

14

15

16

17

18

19

MAINT_143

Figure 1.

Thermostat Housing and Crossover Tube Removal.

TM 9-2815-205-24

0048

0048-2