TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 330 of 856
REMOVAL
NOTE
Right and left rocker arm covers are identical except for oil filler hole and breather tube.
Use same procedure to remove both covers.
1.
Remove four screw and clamp assemblies (Figure 1, Item 3), rocker arm cover (Figure 1, Item 5), and
gasket (Figure 1, Item 4) from cylinder head. Discard gasket (Figure 1, Item 4).
2.
If necessary, disconnect clip (Figure 1, Item 2) and remove oil filler cap assembly (Figure 1, Item 1) from
rocker arm cover (Figure 1, Item 5).
END OF TASK
CLEANING
WARNING
Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;
use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and
do not breathe vapors. Keep away from heat or flame. Never smoke when using
cleaning solvent. Failure to comply may result in injury, illness, or death to
personnel.
Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use
only with protective equipment (goggles, face shield, gloves, etc.). Failure to
comply may result in injury to personnel.
Clean rocker arm covers (Figure 1, Item 5) with cleaning solvent and dry with compressed air.
END OF TASK
TM 9-2815-205-24
0052
0052-2
Back to Top
