TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 351 of 856
CLEANING - Continued
2.
Carefully lower reamer (Figure 19, Item 42) into injector tube (Figure 19, Item 41) until contacting bevel seat
(Figure 19, Item 43).
3.
Steadily turn reamer (Figure 19, Item 42) in a clockwise rotation without applying any downward force.
4.
While maintaining rotation, remove reamer (Figure 19, Item 42) from injector tube (Figure 19, Item 41).
Check reamer (Figure 19, Item 42) and injector tube (Figure 19, Item 41) for amount of carbon removed.
5.
Remove carbon filled grease from reamer (Figure 19, Item 42) and re-apply clean grease. Repeat Steps 2
through 5 until carbon deposits are removed from bevel seat (Figure 19, Item 43) of injector tube
(Figure 19, Item 41).
6.
Clean injector tube (Figure 19, Item 41) with solvent and clean wiping rag. Dry with compressed air.
41
42
43
41
MAINT_460
Figure 19.
Cleaning Injector Tube.
END OF TASK
TM 9-2815-205-24
0054
0054-13
Back to Top
