TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 370 of 856
REMOVAL
1.
Remove three bolts (Figure 1, Item 5), fuel pump (Figure 1, Item 4), and gasket (Figure 1, Item 3) from
flywheel housing. Discard gasket.
2.
Remove drive coupling fork (Figure 1, Item 2) from drive adapter (Figure 1, Item 1).
1
2
3
4
5
MAINT_159
Figure 1.
Fuel Pump Removal/Installation.
END OF TASK
INSTALLATION
1.
Install new gasket (Figure 1, Item 3) on fuel pump (Figure 1, Item 4).
2.
Place drive coupling fork (Figure 1, Item 2) on square end of drive shaft.
3.
Align drive coupling fork (Figure 1, Item 2) with slots in drive adapter (Figure 1, Item 1) and install fuel pump
(Figure 1, Item 4) on flywheel housing with fuel inlet hole in down and inboard position.
4.
Install three bolts (Figure 1, Item 5) fastening fuel pump (Figure 1, Item 4) to flywheel housing. Torque bolts
to 13–17 lb-ft (18–23 N·m).
END OF TASK
FOLLOW ON TASK
1.
Install fuel lines (models 5063-5393 and 5063-539L) (WP 0051).
2.
Install fuel lines (model 5063-5392) (WP 0050).
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0055
0055-2
Back to Top
